Thermo transport and foundry ladles
The thermal transfer ladles are heated electrically, making them ideal for transporting liquid metal. This is taken from the StrikoMelter and transported to the treatment station (e.g., to the DC2 degassing unit). The thermal transfer ladles are available in the types and sizes CLHC M-350, 600 and 800 kg / Al. LST-type ladles are suitable for pick-up with forklifts. To tilt the ladle, the forklift must be equipped with a turntable/rotator.
- LST type ladles are available in sizes 300.500, 750, 1,000 kg capacity for liquid Aluminum
- Foundry ladles with variations in 300, 500, 750 and 1000 kg
- Special sizes available on request.
PR2 - Ladle preheating plants
The ladle preheating plants are optimized for drying, heating and holding of foundry ladles and for sintering of relined ladles.
DC2 - Degassing unit
The purge gas mechanism is designed for metallurgical treatments – degassing and cleaning Al metal melts using inert gases. The advantage of the StrikoWestofen design lies in the low gas consumption and in the very fine, intense and wide-scale distribution of gas bubbles. The fineness of the bubbles achieved ensures a large effective area and a correspondingly high "purity level" of the melt. The DC2 is available in stationary or moveable models.