Modernise to economise: Skoda Auto reduces energy consumption by 10%

Published

Opting to have four 15-year-old StrikoMelters relined and upgraded as part of an Equipment Modernisation Programme (EMP), Skoda Auto reduced energy consumption at its Mladá Boleslav site in the Czech Republic by 10%.

With more than 95% of melting furnace operation costs resulting from energy consumption and metal loss, efforts to revitalise performance or embrace optimisation can be transformational – as car manufacturer Skoda discovered. Given that the four StrikoMelters in use at its manufacturing plant in Mladá Boleslav, Czech Republic, were 15-years-old, Skoda opted to refresh them with an Equipment Modernisation Programme (EMP) from StrikoWestofen.

All four StrikoMelter systems were relined and retrofitted with an optimisation that revolutionised performance by unlocking new levels of efficiency. 

Level monitoring with laser precision

A melting shaft that is full at all times will achieve optimum energy consumption. This is because hot waste gases from the melting process are used to preheat the melting material in the EtaMax shaft prior to the actual melting process. 

To deliver this benefit for Skoda, the EtaMax filling shafts of its 15-year-old StrikoMelters were retrofitted with laser technology. A laser beam scans the filling area of the melting shaft and permanently monitors the filling level. When there is no melting material left in the upper part of the shaft, the filling process is initiated automatically.

This optimisation reduces energy consumption dramatically: “The continuous filling of the shaft made possible by the integrated laser scanner has increased the energy efficiency to the point where we are able to reduce gas consumption by around ten percent per system,” explains Holger Stephan, VP AM Sales Support at StrikoWestofen.

“The one-off purchase costs of this retrofit are usually recovered after only a few months”, Stephan explains. “Today the laser scanner is one of the most frequently sold modernisation options, making it one of our bestsellers!”

All StrikoMelter systems can be retrofitted with the shaft laser. The StrikoWestofen’s furnace upgrade service offers a number of additional options designed to sustainably increase the performance level of existing systems. 

To further optimise usage, made-to-measure training programmes can be designed to show operators how to get the most out of their melting systems with the help of optimum adjustment and the correct charging ratio.

A shaft filled at all times to ensure perfect melting operation: the laser technology permanently monitors the level in the StrikoMelter furnace shaft. As soon as the shaft is able to take up the next batch for preheating, the charging process starts automatically.

By retrofitting filling level monitoring and carrying out relining, it is possible to reduce the energy consumption of old StrikoMelter systems by up to ten percent.

Norican Equipment Modernisation Projects and Packages (EMPs)

Norican's EMPs come in all shapes and sizes.
Upgrade your existing equipment to unlock new levels of Productivity, Quality and Resource Control.

Read more stories about Norican EMPs here.